Beautifully shaped laminated Cypress Pine Hammock Stand. Ideal for the backyard, patio or anywhere you want to enjoy your hammock but don't have suitable hanging fixtures.
Attractive arc design which is created from layers of solid laminated Cypress wood, helping to provide superior strength and support. Cypress wood is unique in that it naturally maintains inherent oils that help it to better withstand the elements. However it will over time turn a silvery gray colour as it ages.
We recommend when possible keeping the stand under cover to prolong it's life. If you do intend to leave the hammock in the elements we recommend regular varnishing to seal the timber. Also leaving the hammock stand in a sunny spot is better than in shade as this helps to discourage moisture retention in the frame should it get wet.
Enjoy your hammock in style this summer!
**Please Note**
While fitting many types of hammocks, we have found this hammock stand to be best suited for our Resort Style Hammock.
Our Mexican Hammocks without spreader bars (Double, Queen, King) are longer than the frame so require some adjustment to fit to the stand as detailed below.
Some options to adjust.
You can make a knot close to the loops on each side to shorten the length of the hammock.
Another simple option is to turn the supplied eye bolt around the other way at one end (See photos left). Then loop the hammock arm over the top of the stand and around the eyebolt. With the other side just loop the hammock end over the eye bolt. We advise when using this method to use a strong cable tie or similar fixing to secure the hammock at each end to ensure the hammock can’t slip off.
Hammock Stand Dimensions
Overall length from end to end: 411cm
Length between connecting hooks: 375cm
Chain length: 100cm (so it allows a 50cm extension for shorter hammocks)
Timber beam thickness: 9cm wide x 6.5cm thick
Leg width: 135cm
Distance between legs: 145cm
Overall height: 121cm
Height to hanging point 115cm
Includes all necessary hardware (Zinc Plated) bolts/nuts and sealing o-rings, 2 eyebolts for the hanging point plus 2 snap hooks for connection.
Shipped in two packages at 20kg each. Assembly required.
Suitable for up to 200kg. |
